5052 Vs 6061 Aluminum Plate
6061 Aluminum Plate Manufacturer RAYIWELL MFG supply aluminum-silicon-magnesium alloy, strengthened by precipitation hardening. This alloy has medium strength, formability, weldability, machinability and corrosion resistance.
Aluminum Plate 6061 T6 temper has an ultimate tensile strength of at least 42,000 psi (290 MPa) and yield strength of at least 35,000 psi (241 MPa). In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties.
Alloy 6061 alumium plate has a relatively high strength, easily welded and is widely used not only for making bicycle frames, but also in construction, aircraft, shipbuilding.
Thickness:0.2-350mm
Width:30-2600mm
Length:200-11000mm
Mother coil: CC or DC
Weight: About 2mt per pallet for general size
MOQ: 5-10ton per size
Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.
Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.
Standard product: GBT3880, JIS4000, EN485, ASTM-B209, EN573
Delivery time: about 30days after receiving the deposit
Payment: T/T
Trading terms: FOB, CIF, CFR
Here below the comparision between 5052 Aluminum Plate and 6061 aluminum plate
| Aspect | 5052 Aluminum Plate (Al-Mg Series) | 6061 Aluminum Plate (Al-Mg-Si Series) |
|---|---|---|
| Key Characteristic | Excellent Formability & Superior Corrosion Resistance | High Strength & Good Overall Performance |
| Alloy Type | Primarily magnesium, Non-Heat-Treatable (strengthened by work hardening) | Magnesium and silicon, Heat-Treatable (e.g., T6 temper) |
| Tensile Strength | Moderate (170-305 MPa) | High (T6 temper: 290-310 MPa or higher) |
| Yield Strength | Lower (e.g., O temper ~65 MPa) | High (T6 temper: 240-276 MPa) |
| Elongation | Good to Excellent (12%-25%) | Moderate (T6 temper: 8%-15%) |
| Corrosion Resistance | Excellent, especially against saltwater and marine atmospheres. | Good, but generally less resistant than 5052 in harsh environments. |
| Workability & Machining | Superior Plasticity and Formability, excellent for bending and deep drawing. | Good machinability. For precision machining, the T651 temper is recommended to minimize stress-induced distortion. |
| Welding Performance | Good | Good, welded structures retain high strength. |
| Typical Applications | Marine components, fuel tanks, vehicle bodies, appliance panels, architectural trim. | Automotive/ bicycle frames, drone arms, precision machinery parts, structural components. |
| Relative Cost | Generally lower | Generally higher (due to alloying elements and heat treatment). |
