3004 3104 Aluminum Coil Strip for Beverage can body Fabrication
The 3004 3104 H19 aluminum coil strips are widely employed in the production of beverage cans. They boast exceptional deep-drawing capabilities and ductility, allowing them to seamlessly adapt to high-speed stamping processes on can body presses.
Moreover, they exhibit a low earing rate after stretching, resulting in the formation of seamless can bodies. The temper H19 also provides them with sufficient strength, making them ideal materials for airtight beverage can bodies.
3104 aluminum sheet is a type of aluminum alloy sheet known for its excellent formability and corrosion resistance. It’s often used in applications that require good workability, such as architectural cladding, kitchen utensils, and other consumer goods.
The “3104” designation is part of the 3xxx series of aluminum alloys, which are primarily alloyed with manganese (Mn) to improve strength and corrosion resistance without significantly affecting formability. The specific composition of 3104 typically includes around 1.0-1.5% manganese.
Properties of 3104 aluminum sheet include:
– Good corrosion resistance.
– Excellent formability and weldability.
– Moderate strength.
– Good surface finish capability.
3004 3104 aluminum coil strip specifications for can body
Our 3004 3104 aluminum coil strip production standard comforms to EN 541, EN 573-3, YS/T435-2009，GB/T 3190, GB/T3880.1-2006.
Physical properties of 3004 3104 can body aluminum coil strips
Available aluminum sheet grade
1000 series: 1050,1060,1070,1080,1100,1145,1200,1235, etc.
2000 series: 2014,2017,2018,2024,2025,2219, 2219,2618a etc.
3000 series: 3003,3004,3102,3104,3105,3005, etc.
4000 series: 4032,4043, 4017, etc
5000 series: 5005,5052,5454,5754,5083,5086,5182,5082, etc.
6000 series: 6061,6063,6262,6101, etc
7000 series: 7072,7075,7003 etc
8000 series: 8011, etc.
Temper of aluminum sheet: O, H, W, F, T
H: H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H111, H112, H114, H116
T: T0-T651
3004 3104 aluminum alloy coils are the primary materials used for can bodies. 3104 belongs to the Al-Mn alloys category.
The addition of the main alloying element, manganese (Mn), enhances the mechanical properties of the alloy without compromising its corrosion resistance.
The most commonly used 3104-H19 aluminum coil for can bodies offers exceptional deep-drawing capability and robust corrosion resistance.
5052 5182 aluminum alloys are the most widely used materials for can lids. These 5xxx series aluminum-magnesium alloys offer excellent ductility and high strength, allowing easy production of various lid sizes.
The 5052-H48 temper, with its moderate strength, can withstand the stresses of carbonated beverages and other gas metal packaging, making it an ideal material for lid production.
5182 aluminum alloy is the most representative material for pull-tab manufacturing. Classified under the 5xxx series of aluminum-magnesium rust-resistant alloys, 5182 aluminum sheets have a magnesium (Mg) content ranging from 4% to 5%.
They exhibit excellent corrosion resistance and processability, along with high tensile strength, making them well-suited for aluminum pull-tab production with specific hardness requirements.
parameter
|
Thickness |
0.2-6.0mm |
|
Width |
100-2400mm |
|
Length |
200-11000mm |
|
Mother coil |
CC or DC |
|
Weight |
About 2mt per pallet for general size |
|
MOQ |
5ton per size |
|
Protection |
paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement. |
|
Surface |
clean and smooth, no bright speck, corrosion, oil, slotted, etc. |
|
Standard product |
GBT3880, JIS4000, EN485, ASTM-B209 |
|
Delivery time |
about 30days after receiving the deposit |
|
Payment |
T/T, L/C at sight |
|
Trading terms |
FOB, CIF, CFR |
Application
